Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Bravo
    4. : How to reset the service on Fiat Bravo.

Fiat Bravo - Video tutorial

Model: Fiat Bravo Bravo 2 - Years 2007-2014
Part: -board computer
Operation: How to reset the service on Fiat Bravo.

In this video tutorial you can see how you can reset the maintenance warning light on Fiat Bravo with simple essential steps. First you must go to an authorized workshop to carry out all the necessary interventions for your vehicle such as changing the filters, air, diesel, oil change, etc. Subsequently, the warning light remains on and must therefore be reset for the next service. To perform this operation it will be necessary to connect a device for diagnosis. So you must necessarily contact an authorized workshop to reset the service to your car.


Posted on 24 September 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos