Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Service on a Fiat 500?

Model: Fiat 500 312 - Years 2007-2022
Part: Service warning light

As seen in this tutorial, resetting the oil service on a Fiat 500 is an extremely simple and quick operation. Before proceeding, ensure that all scheduled maintenance tasks are completed. Start by entering the cabin, then insert the key, turn on the ignition, and fully press the accelerator pedal three times consecutively. Once done, switch off the ignition, turn it back on, and check that the reset has been successful. If not, repeat the operation, ensuring it is completed within about 10 seconds.

Updated on 20 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Warning Light on a Fiat 500
How to Reset the Oil Warning Light on a Fiat 500
Fiat 500 (2007-2021 / 312) Before you begin, check that the oil change and the general service on your Fiat 500 have been completed. Then, sit in the driver's seat and close al…
How do you perform the service and reset the service light in the Fiat 500 X?
How do you perform the service and reset the service light in the Fiat 500 X?
Fiat 500 (2014-2022 / 500 X) In this short video guide, we see the essential steps and tools to use for a maintenance service of the Fiat 500, including changing the engine oil, …
How to Reset the Maintenance Light on the Fiat 500x
How to Reset the Maintenance Light on the Fiat 500x
Fiat 500 (2014-2022 / 500 X) After performing a service or oil change on the vehicle, it is necessary to reset the oil change service light. To reset the service notification on …

Other guides you may be interested in

    Frequently Asked Questions

    • 500 2014-2022 - What does the oil warning light indicate in the Fiat 500X? Read answer
    • 500 2014-2022 - How to reset the service warning light on the Fiat 500X? Read answer
    • 500 2007-2024 - How to reset the Abarth 595 Service warning light? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos