Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Alternator on a Fiat Panda

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Alternator

In this video tutorial, you can see how to replace the alternator on a Fiat Panda 900 by following a few simple steps: first, lift the bonnet and secure it with the appropriate prop; next, take a socket wrench and loosen the alternator bolts. Once the bolts are loosened, continue to unscrew them by hand until they are completely removed from their seats. After loosening the alternator, you can remove the belt; now turn the alternator and you will see two electrical cables connected underneath. Use the socket wrench to unscrew the bolts to remove the electrical connectors. You're done.

Updated on 21 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Alternator from a Fiat Panda 2
How to Remove the Alternator from a Fiat Panda 2
Fiat Panda (2003-2012 / 169, MK 2) In this video, you will learn how to remove and replace the alternator of the second series Fiat Panda by following these simple steps. First, open t…
How to Replace the Alternator on My Fiat Panda 4x4?
How to Replace the Alternator on My Fiat Panda 4x4?
Fiat Panda (1980-2003 / 141, MK 1) In this video, you will learn how to remove (and perform maintenance on) the alternator of your Fiat Panda. First, open the bonnet and start by remov…
How to Remove the Air Filter on a Fiat Panda
How to Remove the Air Filter on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Before you can start, open the bonnet of your Fiat Panda to access the engine bay. Begin by unfastening the clips that secure the air filter cover. T…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos