Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Alternator from a Fiat Panda 2

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Alternator

See other generations:
Video tutorial

In this video, you will learn how to remove and replace the alternator of the second series Fiat Panda by following these simple steps. First, open the bonnet and start by removing the battery and battery tray, disconnecting the terminals and undoing the screw of the bracket; then use a socket spanner to undo the bolts of the alternator located just below, as shown in the video.

At this point, disconnect the wiring to completely remove the alternator; then replace it with the new one and reassemble everything, applying the reverse procedure!


Updated on 3 May 2026 by ScegliAuto


Related tutorials

How to Replace the Alternator on My Fiat Panda 4x4?
How to Replace the Alternator on My Fiat Panda 4x4?
Fiat Panda (1980-2003 / MK 1, 141) In this video, you will learn how to remove (and perform maintenance on) the alternator of your Fiat Panda. First, open the bonnet and start by remov…
How to Replace the Alternator on a Fiat Panda
How to Replace the Alternator on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) In this video tutorial, you can see how to replace the alternator on a Fiat Panda 900 by following a few simple steps: first, lift the bonnet and sec…
How and When to Change the Timing Belt on the Fiat Panda 1.1
How and When to Change the Timing Belt on the Fiat Panda 1.1
Fiat Panda (2003-2012 / 169, MK 2) Briefly, we will see some important instructions on how and when to change the timing belt on the Fiat Panda 1.1 petrol; for this type of engine, it …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos