Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the passenger airbag in the Fiat Panda?

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Alternator

See other generations:
Video tutorial

In this video, you can see the steps necessary to remove the airbag on the passenger side in the Fiat Panda, a very simple and quick operation. First, ensure you disconnect the battery to operate safely and avoid accidental airbag deployment.

Open the glove compartment, unscrew the screws located on the lower and upper sides, unscrew the indicated internal bolt, and remove the drawer. At this point, unscrew the two fastening bolts of the airbag and extract it, finally disconnecting the rear connector.

If you need to install a replacement, simply follow the reverse procedure.


Updated on 8 June 2026 by ScegliAuto


Related tutorials

How to Remove the Steering Wheel Airbag on a Fiat Panda
How to Remove the Steering Wheel Airbag on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) How to remove the steering wheel airbag on a Fiat Panda? Before removing the car's steering wheel, disconnect the battery terminals located in the en…
How to Remove the Driver's Airbag from a Fiat Panda
How to Remove the Driver's Airbag from a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) How to remove the driver's airbag (steering wheel) from a Fiat Panda? This operation is straightforward if you follow the steps: insert a medium-leng…
How to Remove the Airbag and Steering Wheel on the Fiat Panda 2 (169)
How to Remove the Airbag and Steering Wheel on the Fiat Panda 2 (169)
Fiat Panda (2003-2012 / 169, MK 2) In this video tutorial, you will learn how to remove the airbag and steering wheel on the Fiat Panda second series, version 169, by following these s…

Other guides you may be interested in

How to Set the Clock on a Renault Master 3

This guide shows you how to set a new time on a Renault Master 3. Start by turning on the instrument cluster of the vehicle without starting the engine. Next, using the end of the right-hand steering column stalk, scroll through the options on the display until you reach 'set time', then press the down arrow button to make the displayed time blink. Once this is done, press and hold the down arrow button to change the hour, which you can adjust using the two arrow buttons at the end of the stalk. Once the correct hour is set, press and hold the down arrow button again to move to the minutes. After setting the correct time, restart the vehicle.

Watch the video!


by ScegliAuto

More videos