Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Bonnet Support Struts

Model: Fiat Punto MK 2, 188 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Body

See other generations:
Video tutorial

The rear bonnet support struts are actually gas springs and over time they can deteriorate, losing their ability to support the tailgate; replacing them is very simple: start by opening the bonnet, removing the parcel shelf, and applying a support to hold the tailgate in position during the removal of the struts (a broom can be used as shown in the video).

At this point, extract the plastic tab that acts as a stop for the ball joint and detach the head of the strut to apply the new one (check the length and compatibility of the fitting).


Updated on 14 February 2026 by ScegliAuto


Related tutorials

How to Replace the Tailgate Struts on a 2009 Grande Punto
How to Replace the Tailgate Struts on a 2009 Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this video, you will see how to replace the tailgate struts on a 2009 Grande Punto. The operation is quite simple, but you will need two people be…
How to Replace the Seal on a Fiat Punto
How to Replace the Seal on a Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) Replacing the seal on a 2011 Fiat Punto is a very simple operation that can be done independently. This video tutorial will explain how to do it. Sta…
How to Replace the Boot Struts on a Fiat Punto Evo
How to Replace the Boot Struts on a Fiat Punto Evo
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Are the struts on your car's boot out of order? In this video, see how to replace the damaged struts on the rear boot of a Punto Evo. Lift the boot a…

How to reset the tyre pressure warning light on the Dacia Sandero?

The tyre pressure warning light that appears on the instrument cluster of the Dacia Sandero can be reset by inflating the tyres until they reach the correct pressure value: this value is indicated on the sticker attached to the driver’s door pillar. Once the inflation is complete, navigate through the menu that appears on the instrument cluster to find the option related to the tyres: select this with the OK button, which should then be held down for a few seconds to completely turn off the light.

Watch the video!


by ScegliAuto

More videos