Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Toro
    4. : How to reset the service light on the Fiat Toro

Fiat Toro - Video tutorial

Model: Fiat Toro MK 1 - Years 2016-2023
Part: -board computer
Operation: How to reset the service light on the Fiat Toro

In order to reset the oil change service indication on the car, it is necessary to follow the procedure below: access the driver's seat and turn the key to turn on the ignition. Then press and hold the accelerator pedal fully down and immediately after that press and release the brake pedal five times. At the end of these steps, first release the brake pedal completely and after a few seconds also the accelerator pedal. Turn the key and turn off the ignition and then turn it back on to check that the service indication has actually been reset.


Posted on 11 November 2022 by ScegliAuto

This video is currently unavailable

Where are the fuses of the Volvo FH located?

All the fuses of the Volvo FH are located inside the fuse box located in the vehicle cabin: in order to access the box it will be necessary to unhook the internal fixing clips that block the panel in the upper part of the dashboard, along its entire length. extension. Once this panel has been removed, it will be possible to access the fuses and replace them if necessary: here it will be possible to identify the fuses that take care of the operation of the windshield wipers, the cigarette lighter, the headlights, etc. In the vehicle manual each fuse is indicated with its amperage.

Watch the video!


by ScegliAuto

More videos