Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removal of the external door handle of the Fiat 500

Model: Fiat 500 312 - Years 2007-2022
Part: Handle

Let's see today how to disassemble and replace the external handle of the front door of the Fiat 500, but also on the other models of the manufacturer. First of all we open the front door and start by disassembling and removing the door panel; to do this we remove the handle cover and unscrew the screws located on the panel, unhooking it on the sides to remove it. At this point let's unscrew the fixing screws of the external handle, using a hex key; then we unhook the handle mechanism to remove it from the outside, taking off the smaller lid first!

Posted on 20 November 2022 by ScegliAuto

Video tutorial

Related tutorials

Replace the external door handle of the Fiat 500.
Replace the external door handle of the Fiat 500.
Fiat 500 (2007-2022 / ) Today we will see the necessary steps to disassemble and replace the external handle of the front door of the Fiat 500. First, we open the front door…
Disassembly of the external handle and Fiat 500 lock
Disassembly of the external handle and Fiat 500 lock
Fiat 500 (2007-2021 / 312) In this video tutorial we will see how to remove, in simple steps, the external handle and the door lock of a Fiat 500. First we open the front door …
How do you replace the external handle of the Fiat 500?
How do you replace the external handle of the Fiat 500?
Fiat 500 (2007-2022 / ) The operation of replacing the external handle on the Fiat 500 is carried out by first removing the inner door panel, unscrewing the screws near the …

Other guides you may be interested in

How to Replace the Cabin Fan Resistor on a BMW 3 Series

How to Replace the Cabin Fan Resistor on a BMW 3 Series. Open the door and remove the plastic cover under the dashboard on the right side. Use a trim tool to pry off the cover next to the dashboard. Get a screwdriver or a cordless drill, open the glove compartment, and unscrew the fastening screws around the perimeter with a screwdriver. Once this is done, pull out the glove compartment and disconnect the power cables. Remove the fan resistor from its housing, insert the new part into the filter holder, and reassemble all the components of the glove compartment as you disassembled them earlier.

Watch the video!


by ScegliAuto

More videos