Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : Disassembly of the external handle and Fiat 500 lock

Fiat 500 - Video tutorial

Model: Fiat 500 312 - Years 2007-2021
Part: Handle
Operation: Disassembly of the external handle and Fiat 500 lock

In this video tutorial we will see how to remove, in simple steps, the external handle and the door lock of a Fiat 500. First we open the front door and first remove the door panel, removing all the screws. and bolts and finally unhooking the handle cable; then we cut the covering and remove the 10 mm nut in order to disassemble the external handle. At this point we are going to separate the lock cylinder from the old handle, thus reassembling it in the new one; we just have to follow the video to the end!


Posted on 11 February 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • 500 2007-2022 - Why does the Fiat 500 door handle not work? Read Answer
    • 500 2007-2022 - How much does it cost to replace the Fiat 500 handle? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos