Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : Replace the external door handle of the Fiat 500.

Fiat 500 - Video tutorial

Model: Fiat 500 - Years 2007-2022
Part: Handle
Operation: Replace the external door handle of the Fiat 500.

Today we will see the necessary steps to disassemble and replace the external handle of the front door of the Fiat 500. First, we open the front door and begin by removing the plastic cover of the grip handle and the opening handle, unscrewing the screws that are underneath; then we remove the door panel, as shown in the video. At this point, we unscrew the screw of the handle that is inside, first removing the lock cylinder and then the external handle; we replace and reassemble everything, applying the reverse procedure!


Posted on 21 October 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • 500 2007-2022 - Why does the Fiat 500 door handle not work? Read Answer
    • 500 2007-2022 - How much does it cost to replace the Fiat 500 handle? Read Answer

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos