Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : Fiat 500 door replacement

Fiat 500 - Video tutorial

Model: Fiat 500 312 - Years 2007-2021
Part: Door
Operation: Fiat 500 door replacement

In this video tutorial we will see how to remove the door of a Fiat 500. First of all, let's open the door and remove the external rearview mirror, removing the screws and disconnecting the electrical connector. Once done, let's remove the bolts found in the door hinges: remove the door panel and disconnect the window mechanism, removing the electrical connector. At this point we can remove the door, being very careful not to bend the hinges; follow the video to the end to understand the reassembly steps!


Posted on 29 December 2023 by ScegliAuto

    Frequently Asked Questions

    • 500 2007-2023 - How to emergency unlock the trunk of a Fiat 500? Read Answer
    • 500 2007-2022 - Why doesn't the door of the Fiat 500 open from the outside? Read Answer
    • 500 2007-2022 - What to do when the window of the Fiat 500 no longer opens? Read Answer
    • 500 2007-2022 - Why does the opening of the trunk of the Fiat 500 Cabrio get stuck? Read Answer
    • 500 2007-2022 - Why did the hatch of the Fiat 500 get stuck? Read Answer
    • 500 2007-2021 - Can't you open the trunk of a Fiat 500? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos