Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Chain on a Fiat Punto Evo?

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Timing belt

To replace the timing chain on a Fiat Punto Evo, open the bonnet to access the components in the engine bay. On the left side of the engine block, there is a side cover that needs to be removed, as the timing chain is located beneath it. By unscrewing the bolts securing the chain tensioner, you can reduce the tension on the chain and remove it from the sprockets. This allows you to fit the new chain around the sprockets, then cover everything with the side panel.

Updated on 27 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to Replacing the Timing Chain on the Fiat Grande Punto 1.3 MultiJet
Guide to Replacing the Timing Chain on the Fiat Grande Punto 1.3 MultiJet
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) This guide shows how to remove and replace the timing chain on the Fiat Grande Punto 1.3 MultiJet, as well as the Punto Evo. Start by opening the bon…
Replacing the Timing Chain on a Fiat Grande Punto 1.3 MultiJet
Replacing the Timing Chain on a Fiat Grande Punto 1.3 MultiJet
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this video, you will see the main steps to remove and replace the timing chain on a Fiat Grande Punto 1.3 MultiJet. First, open the bonnet of your…
Replacing the Timing Belt on a Fiat Grande Punto - Punto Evo 1.2 Petrol
Replacing the Timing Belt on a Fiat Grande Punto - Punto Evo 1.2 Petrol
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this video, you will see the steps to change the timing belt on a Fiat Grande Punto or Punto Evo with a 1.2 petrol engine. First, lift the vehicle…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos