Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the External Wing Mirror of the Fiat Panda

Model: Fiat Panda 319, MK 3 - Years 2012-2026
Part: Side mirror

In today's video, you will learn how to remove the external wing mirror of the third series Fiat Panda, which is currently on sale. First, open the corresponding door. Remove the internal cover of the mirror and then proceed. Next, extract the screw and disconnect the power connector (if it is an electric mirror). At this point, you can remove the mirror from its housing. Once this is done, you can carry out the necessary maintenance operations directly on the mirror, including removing the glass if needed.

Updated on 28 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the External Wing Mirror on a Fiat Panda
How to Remove the External Wing Mirror on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Open the front door of your Fiat Panda. Begin by unclipping and removing the internal cover near the wing mirror. Next, unscrew and remove the nut th…
How to Remove the External Rear-View Mirror from a Fiat Panda
How to Remove the External Rear-View Mirror from a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Before you begin, open the front door of your Fiat Panda. Using a thin but sturdy tool as a lever, start by prying off and removing the internal cove…
How to Remove the External Wing Mirror of a Fiat Panda
How to Remove the External Wing Mirror of a Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) Remove the internal trim panel of the wing mirror on the driver's side of a Fiat Panda using a trim removal tool (there are plastic clips). Unscrew t…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos