Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tyre warning light on the Fiat Tipo

Model: Fiat Tipo 356, 357, 358 - Years 2016-2026
Part:

If you have just replaced one or more tyres on your new Fiat Tipo (2016-2022) but the warning light continues to appear on the instrument panel, do not worry as we will now discover how to perform the manual reset. First, get inside the car and start the ignition. Next, locate the buttons on the lower left side of the dashboard and press and hold the one with an exclamation mark. Wait a moment, and as soon as the reset of the light is confirmed on the display, release the button, and you are done.

Updated on 28 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Resetting the Tyre Warning Light on a Fiat Tipo
Resetting the Tyre Warning Light on a Fiat Tipo
Fiat Tipo (2016-2026 / 356, 357, 358) In this video, you can see how to reset the tyre warning light on a Fiat Tipo by following these simple steps: First, ensure you have resolved the is…
Resetting the Tyre Warning Light on a Fiat Tipo
Resetting the Tyre Warning Light on a Fiat Tipo
Fiat Tipo (2016-2026 / 356, 357, 358) See what to do when a tyre warning light appears on the dashboard. In this video, reset the tyre pressure warning light on a Fiat Tipo (new model). P…
How to reset the tyre pressure warning light on a Fiat Tipo?
How to reset the tyre pressure warning light on a Fiat Tipo?
Fiat Tipo (2016-2026 / 356, 357, 358) To reset the tyre pressure warning light on a Fiat Tipo, first inflate all the tyres to the recommended pressure value. The recommended pressure is w…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos