Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a 2014 Fiat Ducato

Model: Fiat Ducato X250 - Years 2006-2014
Part: Service warning light

This video shows how to reset the service light on a 2014 Fiat Ducato. First, turn on the ignition by turning the key to the first position. Once done, repeatedly press the system selection button until you see the 'trip' option among the menu choices. At this point, press the same button again until the mileage reading appears. Now, hold down the button for 1 second, then press and hold the OK button for 5 seconds. Next, scroll through the options to find 'assyst plus', then 'full service', and finally confirm by pressing the OK button again. Finally, exit the menu by repeatedly pressing the same button used to confirm the procedure. Now it's time to check if the reset was successful by turning off the ignition and then starting the vehicle.

Updated on 30 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Resetting the service light on a Fiat Ducato
Resetting the service light on a Fiat Ducato
Fiat Ducato (1981-1993 / MK 1) Hello! Today we will explain how to reset the service light on a Fiat Ducato. It is important to remember that this step should only be done after pe…
How to reset the service light on the Fiat Ducato
How to reset the service light on the Fiat Ducato
Fiat Ducato (2006-2014 / X250) Today's information will show us how to reset the maintenance service light for the engine oil change on the Fiat Ducato. First, get in the vehicle a…
How to Reset the Service Light on a Fiat Ducato?
Fiat Ducato (2006-2014 / X250) On the Fiat Ducato, to reset the Service light, insert the ignition key into the ignition switch and turn it to power on the instrument cluster. Once…

    Frequently Asked Questions

    • Ducato 2014-2026 - How to reset the service warning light on Fiat Ducato? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos