Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light on a Fiat Ducato?

Model: Fiat Ducato X250 - Years 2006-2014
Part: Service warning light

On the Fiat Ducato, to reset the Service light, insert the ignition key into the ignition switch and turn it to power on the instrument cluster. Once it is on, press and hold the button located on the right side of the instrument cluster for a few seconds. Release the button when the Service light disappears from the cluster. You can verify that the reset has occurred by turning the cluster off and then back on.

Updated on 24 July 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Fiat Ducato (2006-2014 / X250) To reset the Service light on the Fiat Ducato, insert the ignition key into the ignition switch and turn it to activate the instrument cluster. Once …
Fiat Ducato (2014-2026 / X290) To reset the Service light on the Fiat Ducato, start by turning on the instrument cluster and turning the key in the ignition switch. Once the cluste…
Fiat Ducato (2014-2026 / X290) To reset the Service light of the Fiat Ducato, you need to connect a diagnostic tool to the OBD port of the vehicle: this port will be located on the…

Other guides you may be interested in

    Frequently Asked Questions

    • Ducato 2014-2026 - How to reset the service warning light on Fiat Ducato? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos