Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Brake Pedal Stop Switch on a Panda 169

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Checks and maintenance

See other generations:
Video tutorial

If all the brake lights on your Panda are not working, it is likely not a bulb or electrical issue, but a problem with the switch that activates the brake lights. Locate it at the end of the brake pedal arm. To remove it, turn it counterclockwise until it can be pulled out from behind, disconnecting it from the electrical connector.

You can find the replacement part on major e-commerce platforms; for example, it costs £12.78 plus £3.99 for delivery on Amazon. Replacing it is straightforward: simply follow the removal procedure in reverse, reconnect the connector, insert the switch into the hole, and turn it clockwise.

Task completed.


Updated on 30 June 2026 by ScegliAuto


Related tutorials

How to Remove and Replace the Third Brake Light on a Fiat Panda 169
How to Remove and Replace the Third Brake Light on a Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) Today, you will see the instructions that will allow you to remove and replace the third brake light, or replace the bulbs, on a Fiat Panda 169, seco…
How to Reset the Service Light on a Fiat Panda 169?
How to Reset the Service Light on a Fiat Panda 169?
Fiat Panda (2003-2012 / 169, MK 2) In this video, we will see how to reset the service light on a Fiat Panda 169: the manual states that a diagnostic tool is necessary, but there is ac…
Location of the Inertia Switch on the Fiat Panda
Location of the Inertia Switch on the Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) If, following a severe impact, the Fiat Panda fails to restart, it is likely due to the inertia switch blocking the fuel supply to the engine. The in…

    Frequently Asked Questions

    • Panda 2012-2026 - Where is the outside temperature sensor on the Fiat Panda located? Read answer
    • Panda 2003-2012 - What causes the power steering problem on the Fiat Panda? Read answer
    • Panda 2003-2012 - How to adjust the headlights in the Fiat Panda? Read answer
    • Panda 2012-2021 - What is the tightening torque of the rear wheel hub nut of the Fiat Panda? Read answer
    • Panda 2012-2021 - How many liters of fuel does the Fiat Panda have in reserve? Read answer
    • Panda 2003-2012 - Where is the oil pressure sensor located in the Fiat Panda? Read answer
    • Panda 2012-2026 - How to fold back seats in the Fiat Panda? Read answer
    • Panda 2012-2026 - How many km can the Fiat Panda travel in reserve? Read answer

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos