Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install a Reversing Camera on a Fiat Grande Punto?

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Checks and maintenance

See other generations:
Video tutorial

To install a reversing camera on a Fiat Punto, ensure that the cable connected to the stereo reaches the rear of the vehicle: the cable should be routed under the door pillars. Once the end of the cable connected to the stereo reaches the boot, connect the power supply of the reversing camera to the rear light assembly.

Now, remove the rear bumper by unscrewing the corresponding screws to install the camera underneath; at this point, remount the bumper and check that everything functions correctly.


Updated on 2 July 2026 by ScegliAuto


Related tutorials

How to Install the AUX Cable Preparation on a Fiat Grande Punto
How to Install the AUX Cable Preparation on a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Today, we will look at the instructions to install the AUX cable preparation on the Fiat Grande Punto's radio, as well as on the Punto Evo. First, ge…
How to Set the Time on a Fiat Grande Punto
How to Set the Time on a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Before you start, sit in the driver's seat of your Fiat Grande Punto. Begin by activating the instrumentation by turning the key in the ignition swit…
How to Install the Bluetooth System on the Fiat Grande Punto
How to Install the Bluetooth System on the Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) This guide will show you how to install the Bluetooth system on the Fiat Grande Punto, as well as the Punto Evo. First, get inside the cabin and star…

    Frequently Asked Questions

    • Punto 2005-2018 - What does the words "ESP, Hill holder not available" mean on the Fiat Punto Evo? Read answer
    • Punto 1999-2011 - How do you remove the headrest of the Fiat Punto 1.2? Read answer
    • Punto 2005-2018 - Where is the inertia switch on the Fiat Punto? Read answer
    • Punto 2005-2018 - How do i remove the center console of my Fiat Punto? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos