Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Top Up the Water in the Windscreen Washer Reservoir of the Panda

Model: Fiat Panda 319, MK 3 - Years 2012-2026
Part: Windshield wipers

In this video, you will learn how to top up the water in the windscreen washer reservoir of the Panda. As you can see in the video, the tube leading to the washer fluid reservoir is quite difficult to reach. If you try to top up the water from above with a plastic bottle, it is inevitable that much of the fluid will spill out. Therefore, take a long enough funnel that allows you to top up the water from a comfortable position. Insert it into the tube of the reservoir and begin to pour in the fluid until you see that the reservoir is full. At this point, remove the funnel and close the cap.

Updated on 3 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Top Up the Screenwash Fluid in the Fiat Panda?
How to Top Up the Screenwash Fluid in the Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) To top up the screenwash fluid in the Fiat Panda, open the bonnet using the lever located under the steering column. Once the bonnet is open, you wil…
Replacing the Windscreen Washer Pump on a Fiat Panda
Replacing the Windscreen Washer Pump on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) This guide briefly outlines the main steps to remove and replace the windscreen washer pump on a Fiat Panda. First, move to the front of the vehicle …
How to top up the windshield washer fluid on the Fiat Panda
How to top up the windshield washer fluid on the Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) Below we will see the information that will allow us to top up the windshield washer fluid of the Fiat Panda. First, we open the hood of the car and …

    Frequently Asked Questions

    • Panda 2012-2026 - Where is the Fiat Panda wiper fluid reservoir located? Read answer

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos