Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Unscrew the Radiator Cap on a Fiat Panda

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012

See other generations:
Video tutorial

In this brief guide, I will illustrate some simple tips for unscrewing the radiator cap on a Fiat Panda. After this, you can easily check the fluid level and subsequently top up with water or, even better, the appropriate coolant for cars.

The task is extremely easy, but first, ensure safety with some simple precautions: park the vehicle in a safe location and engage the handbrake. The engine must not have been turned off recently.

Open the bonnet using the lever inside the cabin. A second lever is located under the metal of the bonnet itself.

Now you can unscrew the cap covering the radiator.


Updated on 11 March 2026 by ScegliAuto


Related tutorials

How to replace the heating radiator in the Fiat Panda?
How to replace the heating radiator in the Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) In this tutorial we can see how to replace the heating radiator in the Fiat Panda, a simple operation but one that requires good manual skills. First…
How to Remove the Heating Radiator from a Fiat Panda
How to Remove the Heating Radiator from a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Before starting, sit in the driver's seat of your Fiat Panda. Begin by dislodging the gear lever gaiter from its housing and lifting it. Next, unscre…
How to Replace the Heater Radiator in a Fiat Panda
How to Replace the Heater Radiator in a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) In this brief guide, you will learn how to remove and replace the heater radiator in a Fiat Panda. First, get inside the vehicle and start by removin…

    Frequently Asked Questions

    • Panda 2003-2012 - Where is the fuel filter located on the Fiat Panda 1.2 169? Read answer

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos