Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Brake Light on a Fiat 500

Model: Fiat 500 500 L - Years 2012-2023
Part: Tail light bulb

This tutorial explains how to replace the brake light on a 2015 Fiat 500. The lights in question are located in the rear lights of the car. First, switch off the car, pull the handbrake, and open the boot. At this point, remove the light unit by unscrewing the two screws that secure it, typically requiring an 8mm Allen key; once the screws are removed, leverage the side to extract the light unit, taking care to disconnect the power connector. Now, as shown towards the end of the video, remove the securing screws above the light unit to take out the bulb holder and proceed with the replacement.

Updated on 6 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the stop bulb in a Fiat 500 L
How to replace the stop bulb in a Fiat 500 L
Fiat 500 (2012-2023 / 500 L) In this video tutorial, you can see how to replace the stop bulb in a Fiat 500 L by following some simple steps that will help you work independently…
How to Fix the Third Brake Light on the Fiat 500
How to Fix the Third Brake Light on the Fiat 500
Fiat 500 (2007-2024 / 312) Here’s how to change the bulb of the third brake light on a Fiat 500: Open the tailgate, locate the two plastic caps on the inner trim near the third…
How to replace the third brake light on the Fiat 500L
How to replace the third brake light on the Fiat 500L
Fiat 500 (2012-2023 / 500 L) Today we will explain how to replace the third brake light of the Fiat 500L. To carry out this operation we will need a spatula or a cutter and a 10m…

    Frequently Asked Questions

    • 500 2007-2024 - How many reversing lights are there on the Fiat 500? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos