Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Lights on the Fiat 500 Abarth

Model: Fiat 500 312 - Years 2007-2021
Part: Tail light

In this video tutorial, you will see how to remove and replace the original rear lights with those from the facelift version on the Fiat 500, including the Abarth version. First, remove the original lights; to do this, open the boot and start by unscrewing the fastening screws found on the sides. Next, remove the rear light by disconnecting the electrical connector for the bulbs; then simply fit the new rear light, already wired, connecting the light connector; check its operation (indicators, reverse, and stop)!

Updated on 23 April 2026 by ScegliAuto

Video tutorial

Related tutorials

In today's tutorial video, see how to remove and replace, in simple and quick steps, the front headlight bulb on the Fiat 500, including the Abarth version. First, open the bonnet of your car and start by removing the protection cap of the bulbs, located
In today's tutorial video, see how to remove and replace, in simple and quick steps, the front headlight bulb on the Fiat 500, including the Abarth version. First, open the bonnet of your car and start by removing the protection cap of the bulbs, located
Fiat 500 (2007-2021 / 312) …
Replacing the Rear Lights on the Fiat 500 Abarth
Replacing the Rear Lights on the Fiat 500 Abarth
Fiat 500 (2007-2022 / 312) In today's tutorial video, you will find the instructions to remove and replace the rear lights with those from the facelift version of the Fiat 500 …
How to replace the rear shock absorbers on the Fiat 500 Abarth
How to replace the rear shock absorbers on the Fiat 500 Abarth
Fiat 500 (2007-2021 / ) In this video, you will see how to remove and replace the rear shock absorbers on the Fiat 500, in Abarth version; these components should be replace…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos