Do it yourself
Frequently asked questions about cars and motorcycles

How to Adjust the Handbrake Lever of the Fiat Punto

Model: Fiat Punto MK 2, 188 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Checks and maintenance

See other generations:
Video tutorial

In this brief and simple guide, you will learn how to adjust the travel of the handbrake lever of the Fiat Punto. Before making the adjustment, ensure that the rear brake shoes are in good condition; then, get into the vehicle and unscrew the bolt of the centre tunnel found at the rear to remove it, as shown in the video.

At this point, tighten or loosen the adjustment screws depending on whether you want to tighten or loosen the handbrake lever; to achieve the optimal result, you will need to perform several tests.


Updated on 12 July 2026 by ScegliAuto


Related tutorials

Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) To adjust the handbrake on your car, there are usually two bolts located behind it, hidden by a protective plastic cover, which you can use to set th…
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) This video shows how to adjust the handbrake on a Fiat Grande Punto. Using a screwdriver, remove the cover located under the armrest, disconnect the …
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) To adjust the handbrake on a Fiat Punto, park the car on a level surface and fully lower the lever. Move the front seats back and remove the plastic …

    Frequently Asked Questions

    • Punto 2005-2018 - What does the words "ESP, Hill holder not available" mean on the Fiat Punto Evo? Read answer
    • Punto 1999-2011 - How do you remove the headrest of the Fiat Punto 1.2? Read answer
    • Punto 2005-2018 - Where is the inertia switch on the Fiat Punto? Read answer
    • Punto 2005-2018 - How do i remove the center console of my Fiat Punto? Read answer

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos