Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Radio from a Fiat 500?

Model: Fiat 500 500 L - Years 2012-2023
Part: Car stereo

The radio in a Fiat 500 can be removed using special extraction tools. These tools are specifically designed to remove radios from their installation slots and may vary in shape depending on the car model. Obtain the ones suitable for the Fiat 500. To insert them, first remove the plastic covers that hide the entry holes on the radio. Use the video for guidance. Once the holes are exposed, insert the tools into them and use them to pull the radio towards you. Don't forget to disconnect the cables at the back!

Updated on 14 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Radio from the Fiat 500
How to Remove the Radio from the Fiat 500
Fiat 500 (2007-2021 / 312) In today's video, learn how to remove the original radio from the Fiat 500. First, locate the selection buttons on the radio and release them with a …
How to Remove the Radio from a Fiat 500
How to Remove the Radio from a Fiat 500
Fiat 500 (2007-2021 / 312) Before you start, sit in the driver's seat of your Fiat 500. Begin by prising off and removing the covers of the slots connected to the clips that se…
How to Remove the Original Radio from a Fiat 500
How to Remove the Original Radio from a Fiat 500
Fiat 500 (2007-2024 / 312) How to remove the original radio from a Fiat 500? Watch this video carefully to see how to carry out the removal following the tutorial. Use the orig…

    Frequently Asked Questions

    • 500 2007-2022 - Why does the radio volume control on the Fiat 500 not work? Read answer
    • 500 2007-2022 - What to do if the radio of the Fiat 500 does not work? Read answer
    • 500 2012-2023 - How to unlock Fiat 500 car stereo? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos