Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Punto
    4. : Replacement of the diesel filter of the Fiat Punto 1.3 Multijet.

Fiat Punto - Video tutorial

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Diesel filter
Operation: Replacement of the diesel filter of the Fiat Punto 1.3 Multijet.

Below we will show you the necessary instructions that will allow us to disassemble and replace the diesel filter of the Fiat Punto 1.3 Multijet. First, we open the engine hood of our car and start disconnecting the electrical connector of the diesel filter. Then, we unscrew the plastic ring to open it, removing the gasket and the cartridge that we find inside, as shown in the video. At this point, we install the new diesel filter, being careful to replace the cap gasket, re-attaching the cover and connecting the electrical wiring!


Posted on 4 April 2023 by ScegliAuto

    Frequently Asked Questions

    • Punto 2005-2018 - Where is the Fiat Punto diesel filter located? Read Answer
    • Punto 2005-2018 - How much does it cost to replace the diesel filter in the Fiat Grande Punto 1.3 MultiJet? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos