Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the fog light bulbs in the Fiat Toro?

Model: Fiat Toro MK 1 - Years 2016-2024
Part: Fog lights

In this tutorial, you will see how to replace the fog light bulbs in the Fiat Toro, a very simple operation. Before proceeding, ensure that the key is not in the ignition for safety. Start by positioning yourself in front of the wheel well on the side you will be working on, then remove each fastening screw from the bumper, three positioned vertically and two on the lower edge. Once done, grasp the bulb holder from the back, turn it counterclockwise, and pull it out of the housing. To install the replacement, disconnect the connector and follow the reverse procedure.

Updated on 23 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Tail Lights on the Fiat Toro
How to Replace the Tail Lights on the Fiat Toro
Fiat Toro (2016-2024 / MK 1) In today's video, see how to remove the rear light assembly of the Fiat Toro to replace one or more burnt-out bulbs. Open the tailgate. Proceed to un…
Replace Engine Oil and Oil Filter on the Fiat Toro
Fiat Toro (2016-2024 / MK 1) Today, let's go through the procedure to perform the routine maintenance service by replacing the engine oil and oil filter on the Fiat Toro. First, …
How do you reset the Service light of the Fiat Toro?
How do you reset the Service light of the Fiat Toro?
Fiat Toro (2016-2024 / MK 1) It will be possible to reset the Service light on the instrument panel of the Fiat Toro by inserting the ignition key into the ignition switch, so th…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos