Replace Engine Oil and Oil Filter on the Fiat Toro

Model: Fiat Toro MK 1 - Years 2016-2024
Part: Engine oil

Today, let's go through the procedure to perform the routine maintenance service by replacing the engine oil and oil filter on the Fiat Toro. First, raise the vehicle and start unscrewing the oil drain plug located on the oil pan, allowing it to drain into a container for about ten minutes; next to it, you will find the oil filter, which you can unscrew as shown in the video. At this point, replace the cartridge and the filter gasket; finally, open the hood and unscrew the fill cap, topping off with new oil!

Updated on 17 July 2026 by ScegliAuto

This video is currently unavailable

Other guides you may be interested in

Oil Filter - Maintenance and repair on other vehicles

- Maintenance and repair on other vehicles

Engine - Maintenance and repair on other vehicles

Engine Oil - Maintenance and repair on other vehicles

- Maintenance and repair on other vehicles

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!

by ScegliAuto

Replace Engine Oil and Oil Filter on the Fiat Toro

Related tutorials

Other guides you may be interested in

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

More videos