Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Engine Oil Light on Fiat Toro

Model: Fiat Toro MK 1 - Years 2016-2024
Part: Service warning light

In this video tutorial, you will see how to reset the oil light on a Fiat Toro. When the oil light comes on, the first thing you need to do is replace the engine oil and the oil filter. After performing the DIY maintenance, get in the vehicle and fully press the accelerator pedal and turn the key to turn on the instrument cluster. Then, press the brake pedal 5 times while simultaneously holding down the accelerator pedal until the count is complete. Keep the accelerator pedal pressed and turn off the instrument cluster. Release the accelerator pedal, then turn it back on to check that the light has turned off.

Updated on 1 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service on the Fiat Toro Pickup?
How to Reset the Service on the Fiat Toro Pickup?
Fiat Toro (2016-2024 / MK 1) In this tutorial, you will see how to reset the service on the Fiat Toro pickup, a very simple and quick operation to perform only after completing a…
How to Reset the Oil Service Light in a Fiat Toro?
How to Reset the Oil Service Light in a Fiat Toro?
Fiat Toro (2016-2024 / MK 1) In this tutorial, you will see how to reset the engine oil service light in a Fiat Toro. Before performing this simple and quick operation, make sure…
How to Reset the Oil Light on a Fiat Toro
How to Reset the Oil Light on a Fiat Toro
Fiat Toro (2016-2024 / MK 1) In this video tutorial, you will see how to reset the oil light on a Fiat Toro by following a few simple steps that will guide you toward proper vehi…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos