Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Oil Sump from a Fiat Grande Punto

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Oil pan

In this video tutorial, you will learn how to remove the oil sump from a Fiat Grande Punto. First, lift the vehicle and drain all the engine oil by unscrewing the drain bolt and letting it flow into a container. Next, use a socket spanner to remove all the fastening screws located on the sides of the sump. Now, remove the fastening bolts of the exhaust manifold and move the tailpipe away; unscrew the screw of the side bracket of the sump and remove all the upper screws. Finally, remove the sump as shown in the video!

Updated on 27 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Engine Oil and Oil Filter Replacement for the Fiat Grande Punto 1.3 Multijet
Engine Oil and Oil Filter Replacement for the Fiat Grande Punto 1.3 Multijet
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Follow these steps to carry out the routine maintenance service by replacing the engine oil and oil filter of the Fiat Grande Punto 1.3 Multijet, as …
Changing the Gearbox Oil in a Fiat Grande Punto
Changing the Gearbox Oil in a Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Changing the transmission oil should be done at regular intervals to ensure the proper functioning of the gearbox. Here’s how to change it on a Fiat …
How to replace the engine oil and oil filter of the Fiat Grande Punto 1.2 8V.
How to replace the engine oil and oil filter of the Fiat Grande Punto 1.2 8V.
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) The information provided in this guide will show us how to perform the regular maintenance service, replacing the engine oil and oil filter, of the F…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos