|
Do it yourself
| |||
| ||||
How to Remove the Oil Filter on a Fiat Grande Punto
Model: Fiat Punto
199, MK 3, Grandepunto , Punto EVO
- Years:
2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Video tutorial
Remove and install the engine oil filter along with the related fluid on a Fiat Grande Punto. Follow this guide to proceed with the replacement: open the car door and pull up the engine compartment release lever located at the bottom left of the dashboard, then lift the front bonnet and secure it. Using a socket spanner, unscrew the large locking bolt of the container cap where the oil filter is located. Extract the worn oil filter, unscrew the drain bolt of the oil sump (allow the used oil to drain into a container) and then screw it back in. Install a new filter in the container, ensuring it fits snugly against the walls. Finally, refit the oil box cap and top up the engine. Close the front bonnet last.
Updated on 28 February 2026 by ScegliAuto
Related tutorials
Fiat Punto
(2005-2018 /
199, MK 3, Grandepunto , Punto EVO)
Follow these steps to carry out the routine maintenance service by replacing the engine oil and oil filter of the Fiat Grande Punto 1.3 Multijet, as …
Fiat Punto
(2005-2018 /
199, MK 3, Grandepunto , Punto EVO)
The information provided in this guide will show us how to perform the regular maintenance service, replacing the engine oil and oil filter, of the F…
Fiat Punto
(2005-2018 /
199, MK 3, Grandepunto , Punto EVO)
This guide outlines the procedure for replacing the engine oil and oil filter while performing the regular maintenance service for the Fiat Punto Evo…
Other guides you may be interested in
|
How to Remove the Toll Tag Holder from the Car Windscreen
The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.065
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |