Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cabin Air Filter on the Fiat Punto 1300 Multijet

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Cabin air filter

To replace the cabin air filter and the air filter on this car model, follow the step-by-step instructions below. After accessing the cabin from the passenger side, locate the panel on the left side of the centre console that needs to be removed by pulling it towards you. Underneath, you will find the compartment containing the filter, which is protected by a plastic cover that must be removed. Then, extract the filter from the compartment and replace it with the new one. Finally, reattach the cover and reposition the plastic panel.

Updated on 30 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Oil Change for 1300 MultiJet
Oil Change for 1300 MultiJet
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) How to change the engine oil on a 1300 MultiJet engine? Let's see the procedure on a Fiat Punto. Open and lift the front bonnet, securing it in place…
Removing the Glow Plugs on a Fiat Punto - Grande Punto 1.3 Multijet
Removing the Glow Plugs on a Fiat Punto - Grande Punto 1.3 Multijet
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In today's video tutorial, you will learn how to remove and replace the glow plugs on the Fiat Punto 1.3 Multijet, as well as on the Grande Punto and…
Replacing the Timing Chain of the Fiat Punto 1.3 MultiJet
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) This guide outlines the main steps to remove and replace the timing chain of the Fiat Grande Punto 1.3 MultiJet, as well as the Fiat Panda and Fiat 5…

Other guides you may be interested in

    Frequently Asked Questions

    • Punto 2005-2018 - Where is the cabin filter on the Fiat Grande Punto? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos