Do it yourself
Frequently asked questions about cars and motorcycles

Repair the Internal Plate of the Demister on the Fiat Grande Punto for Free

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Checks and maintenance

See other generations:
This video is currently unavailable

A zero-cost repair for a part that tends to break easily on the Grande Punto: the internal plate of the demister. All you need to do is carefully dismantle it to recover the broken pieces, re-solder them with a common soldering iron, and put the clips back in place as shown in the video.

Then reattach the cover on the sponge, which would otherwise completely disintegrate. At this point, you just need to see if you can successfully reassemble it. You have salvaged a part without spending anything, and the vehicle is back in shape.

A great success.


Updated on 2 August 2026 by ScegliAuto


Related tutorials

Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this video tutorial, you will learn how to disassemble and repair the windscreen washer reservoir of the Fiat Grande Punto, as well as the Punto E…
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Today's instructions will show you how to repair the fuel cap on a Fiat Grande Punto, as well as on the Punto Evo. First, open the fuel flap and star…
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Today we will see the instructions that will allow us to dismantle and replace the water pump of the Fiat Grande Punto 1.2. First, we open the hood o…

    Frequently Asked Questions

    • Punto 2005-2018 - What does the words "ESP, Hill holder not available" mean on the Fiat Punto Evo? Read answer
    • Punto 1999-2011 - How do you remove the headrest of the Fiat Punto 1.2? Read answer
    • Punto 2005-2018 - Where is the inertia switch on the Fiat Punto? Read answer
    • Punto 2005-2018 - How do i remove the center console of my Fiat Punto? Read answer

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos