Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly and Repair of the Windscreen Washer Reservoir of the Fiat Punto

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016

See other generations:
This video is currently unavailable

In this video tutorial, you will learn how to disassemble and repair the windscreen washer reservoir of the Fiat Grande Punto, as well as the Punto Evo. First, lift the vehicle and begin by removing the front right wheel; then remove the wheel arch liner by disconnecting the brake pad wear sensor tube.

Next, disconnect the washer reservoir tube, allowing it to drain into a container; now remove the small pump and unscrew the screws to fully detach the reservoir.

All that’s left is to carry out the repair or replacement!


Updated on 8 May 2026 by ScegliAuto


Related tutorials

Removing the Rear Door Panel on the Fiat Grande Punto
Removing the Rear Door Panel on the Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this video, you will see how to remove the rear door panel and how to solve the locking issue on the Fiat Grande Punto, as well as the Punto Evo. …
Removing the Front Door of the Fiat Punto
Removing the Front Door of the Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) The instructions in this guide will allow you to remove the front door of the Fiat Punto. First, open the front door and start unscrewing the bolts f…
Disassembly of the Fiat Punto instrument panel
Disassembly of the Fiat Punto instrument panel
Fiat Punto (1999-2011 / MK 2, 188) In this short guide, we will see the steps that will allow us to disassemble and replace the instrument panel of the Fiat Punto. First of all, we get…

    Frequently Asked Questions

    • Punto 2005-2018 - Where is the inertia switch on the Fiat Grande Punto? Read answer
    • Punto 2005-2018 - How many km does the Fiat Punto run in reserve? Read answer

How to Set the Clock on a Renault Master 3

This guide shows you how to set a new time on a Renault Master 3. Start by turning on the instrument cluster of the vehicle without starting the engine. Next, using the end of the right-hand steering column stalk, scroll through the options on the display until you reach 'set time', then press the down arrow button to make the displayed time blink. Once this is done, press and hold the down arrow button to change the hour, which you can adjust using the two arrow buttons at the end of the stalk. Once the correct hour is set, press and hold the down arrow button again to move to the minutes. After setting the correct time, restart the vehicle.

Watch the video!


by ScegliAuto

More videos