Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Qubo
    4. : How to enter the radio unlock code in the Fiat Qubo?

Fiat Qubo - Video tutorial

Model: Fiat Qubo MK 1 - Years 2008-2019
Part: Car stereo
Operation: How to enter the radio unlock code in the Fiat Qubo?

In the event that the car radio of our Fiat Qubo locks, for example, after replacing or temporarily disconnecting the battery, we will need to enter the security code following the procedure shown in this video. It is provided at the time of purchase but can be retrieved from an official Fiat dealership in case of loss. First, we insert the key and turn on the instrument panel, then we wait for the radio to initialize and remove the notification on the screen by pressing the "OK" button. At this point, we enter the code using the touch-screen keyboard, confirm it, and if correct, the car radio will start functioning normally again.


Posted on 11 July 2023 by ScegliAuto

    Frequently Asked Questions

    • Qubo 2008-2019 - How do you unlock the Fiat Qubo car radio? Read Answer
    • Qubo 2008-2019 - Why did the message "Radio blocked - Wait" appear in the radio of the Fiat Qubo? Read Answer
    • Qubo 2008-2019 - Where is the security code of the radio of the Fiat Qubo? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos