Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Wing Mirror of the Fiat Panda

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Side mirror

See other generations:
Video tutorial

In today's video, see how to remove the external wing mirror of the Fiat Panda 169, which is the second series of the Italian city car. This video applies to both mirrors, as the mechanism is the same. First, remove the internal cover mounted on the door.

Once done, proceed to remove the internal component and, if it's electric, disconnect the power connector in front of you. Next, detach the outer part of the casing after removing any screws if present. Operation complete.

You can now replace the part in question.


Updated on 7 August 2026 by ScegliAuto


Related tutorials

How to Remove the External Wing Mirror on a Fiat Panda
How to Remove the External Wing Mirror on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Open the front door of your Fiat Panda. Begin by unclipping and removing the internal cover near the wing mirror. Next, unscrew and remove the nut th…
How to Remove the External Rear-View Mirror from a Fiat Panda
How to Remove the External Rear-View Mirror from a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Before you begin, open the front door of your Fiat Panda. Using a thin but sturdy tool as a lever, start by prying off and removing the internal cove…
How to replace the external rear-view mirror on a Fiat Panda
How to replace the external rear-view mirror on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Before starting, open the door corresponding to the mirror you need to replace on your Fiat Panda. Begin by unclipping and removing the internal cove…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos