Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Fiat
  4. :
  5. 500
  6. : How do you turn on the fog lights on a Fiat 500?

Fiat 500 - Video tutorial

Model: Fiat 500 - Years 2007-2022
Part: Fog lights
Operation: How do you turn on the fog lights on a Fiat 500?

In this very short video guide, let's see how to turn on the fog lights on a Fiat 500, a model produced from 2007 to 2022. The fog lights can only be activated when the low beam headlights are already on. To turn on the fog lights, simply press the appropriate button located below the car radio and to the right of the hazard lights button. The button has two modes: pressing it once will activate the front fog lights, pressing it a second time will activate both the front fog lights and the rear fog light, and finally, press it a third time to turn them off.


Posted on 14 August 2023 by ScegliAuto

    Frequently Asked Questions

    • 500 2007-2022 - Where is the fog light button located on the Fiat 500? Read Answer
    • 500 2012-2023 - How do the front fog lights come on in the Fiat 500? Read Answer
    • 500 2007-2022 - Where are the fog lights on the FIAT 500? Read Answer
    • 500 2007-2022 - Where are the fog lights on the new Fiat 500? Read Answer
    • 500 2012-2023 - Where are the fog lights located in the Fiat 500L? Read Answer
    • 500 2007-2023 - How do the fog lights come on in the Fiat 500? Read Answer
    • 500 2007-2023 - How do the fog lights come on in the Fiat 500? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos