Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Battery in a Fiat 500X Remote

Model: Fiat 500 500 X - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Key

See other generations:
Video tutorial

Learn how to change the battery in a Fiat 500X remote (this procedure also applies to the remotes for Freemont, Punto, and Tipo). First, remove the physical emergency key from the remote. Using the key, pry between the cover and the base of the remote to open it. Inside, you will find the button cell battery: it is a common CR2032, available at any supermarket or newsagent for a few pounds.

When replacing it, pay attention to the polarity; ensure it is inserted the correct way. At this point, reassemble the shell and the physical key. The operation is complete.


Updated on 15 August 2026 by ScegliAuto


Related tutorials

How to Replace the Key Battery of the Fiat 500X
How to Replace the Key Battery of the Fiat 500X
Fiat 500 (2014-2022 / 500 X) This brief video tutorial explains how to replace the battery of the key for the 2016 Fiat 500X. The 500X features a keyless remote that you can simp…
How to replace the remote control battery of the Fiat 500X?
How to replace the remote control battery of the Fiat 500X?
Fiat 500 (2014-2022 / 500 X) Replacing the flat battery of the Fiat 500X remote control is a very simple operation, as shown in the attached video guide, which is valid for both …
How to Replace the Remote Battery of the Fiat 500X?
How to Replace the Remote Battery of the Fiat 500X?
Fiat 500 (2014-2022 / 500 X) To replace the remote battery of the Fiat 500X, press the button located at the top of the device to release the key. After the key is released, leve…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos