Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : How do you remove the central tunnel of the Fiat 500?

Fiat 500 - Video tutorial

Model: Fiat 500 - Years 2007-2022
Part: Central tunnel
Operation: How do you remove the central tunnel of the Fiat 500?

In order to remove the central tunnel of the Fiat 500, you need to loosen the screws that secure the corresponding plastic covering: these screws are located on the internal side parts of the two front footrest compartments. Once these screws have been unscrewed, it will be possible to loosen those located in the cup holder compartment, located in the central part of the tunnel. At this point, the covering can be completely removed from its housing, replacing it with a new spare part: the latter must be connected with the appropriate screws.


Posted on 19 September 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos