Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Dismantle the Instrument Cluster of a Fiat Panda?

Model: Fiat Panda 319, MK 3 - Years 2012-2026
Part: Instrument cluster

To dismantle the instrument cluster of a Fiat Panda, first remove it from its housing by undoing the securing screws and disconnecting the connectors at the back. Once the cluster is extracted, loosen the two central screws that secure the display trim. After removing this, detach the four clips that hold the trim at the top and bottom of the cluster. Then, by loosening the additional two screws beneath the trim, you can remove the rear panel of the instrument cluster, gaining access to the components inside.

Updated on 18 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Air Filter on a Fiat Panda
How to Remove the Air Filter on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Before starting, open the bonnet of your Fiat Panda to gain access to the engine bay. Begin by unfastening the securing clips of the air filter cover…
How can I reset the service light on my Fiat Panda?
How can I reset the service light on my Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) To reset the maintenance service indicator on your Fiat Panda, first enter the vehicle. Then, turn on the instrument panel (you will see the maintena…
How to Remove the Air Filter on a Fiat Panda
How to Remove the Air Filter on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Before you can start, open the bonnet of your Fiat Panda to access the engine bay. Begin by unfastening the clips that secure the air filter cover. T…

    Frequently Asked Questions

    • Panda 2012-2026 - How do you access the on-board menu of the Fiat Panda? Read answer

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos