Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Instrument Cluster from a Fiat Panda

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Instrument cluster

How do you remove the instrument cluster from a Fiat Panda? Carefully follow these steps for proper disassembly. Remove the plastic trim from the upper part of the instrument cluster (unscrew the screws with a screwdriver), detach it from the dashboard, then unscrew the securing screws located at the sides of the instrument cluster. Remove the instrument cluster from the dashboard (disconnect the power cable). Once the piece is removed, fit a new one or (replace the LEDs/bulbs in the cluster) reassemble the same one. Finally, proceed to mount the piece following the previous steps.

Updated on 4 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Dashboard Instrument Cluster Bulbs on the Fiat Panda
Replacing the Dashboard Instrument Cluster Bulbs on the Fiat Panda
Fiat Panda (1980-2003 / 141, MK 1) In this video tutorial, you will see the main instructions for replacing the dashboard instrument cluster bulbs on the Fiat Panda. First, get inside …
Resetting Oil Light on Fiat Panda
Resetting Oil Light on Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) Reset the warning light that has appeared on the dashboard of the Fiat Panda. Turn on the dashboard, press the accelerator (held down), then press th…
How to Set the Time on a Fiat Panda
How to Set the Time on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) In this video, learn how to adjust the clock on a Fiat Panda: turn on the instrument panel with the remote key and wait for the screen to appear on t…

Other guides you may be interested in

    Frequently Asked Questions

    • Panda 2012-2026 - How do you access the on-board menu of the Fiat Panda? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos