Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Instrument Cluster on a Fiat Panda?

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Instrument cluster

See other generations:
Video tutorial

To remove the instrument cluster on the Fiat Panda, first remove the trim surrounding it. Loosen two screws located directly above the speedometer and two at the bottom, on the right and left sides. Once the trim is removed, loosen three more Torx screws located underneath and disconnect the connector by moving the red lever.

Once the screws are loosened and the connector is detached, you can remove the instrument cluster and replace it.


Updated on 24 April 2026 by ScegliAuto


Related tutorials

How to Remove the Instrument Cluster from a Fiat Panda
How to Remove the Instrument Cluster from a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) How do you remove the instrument cluster from a Fiat Panda? Carefully follow these steps for proper disassembly. Remove the plastic trim from the upp…
How to Remove the Radio from the Fiat Panda?
How to Remove the Radio from the Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) To remove the radio from the Fiat Panda, insert the specific U-shaped keys provided when purchasing the car. If you do not have these keys, as shown …
Resetting Oil Light on Fiat Panda
Resetting Oil Light on Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) Reset the warning light that has appeared on the dashboard of the Fiat Panda. Turn on the dashboard, press the accelerator (held down), then press th…

    Frequently Asked Questions

    • Panda 2012-2026 - How do you access the on-board menu of the Fiat Panda? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos