Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting Oil Light on Fiat Panda

Model: Fiat Panda 319, MK 3 - Years 2012-2026
Part: Service warning light

Reset the warning light that has appeared on the dashboard of the Fiat Panda. Turn on the dashboard, press the accelerator (held down), then press the brake pedal seven times. Hold the accelerator pedal for one minute, turn off the dashboard (wait one minute). Turn on the instrument panel, and you will see the light flashing. As soon as it becomes steady, start the car. Check the light on the dashboard by turning it off and on with the ignition key. If the maintenance did not succeed, try again.

Updated on 17 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on Fiat Panda 1.3 MultiJet
How to Reset the Service Light on Fiat Panda 1.3 MultiJet
Fiat Panda (2003-2012 / 169, MK 2) In today's video, you will reset the service light for the regular oil change maintenance on a Fiat Panda 1.3 MultiJet second series, but this also a…
Resetting the Tyre Pressure Light on Fiat Panda
Resetting the Tyre Pressure Light on Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) This very simple procedure can be performed on Fiat Panda and similar vehicles to reset the tyre pressure warning light. Use the selection buttons lo…
Resetting the Service Light on Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) In this video, we will see the steps to reset the service light for the regular maintenance oil change on a Fiat Panda, as well as on other models fr…

Other guides you may be interested in

    Frequently Asked Questions

    • Panda 2003-2012 - What to do when the service warning light comes on on the Fiat Panda 169? Read answer
    • Panda 2012-2026 - How do you reset the Fiat Panda Service warning light? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos