Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on Fiat Panda 1.3 MultiJet

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Service warning light

See other generations:
Video tutorial

In today's video, you will reset the service light for the regular oil change maintenance on a Fiat Panda 1.3 MultiJet second series, but this also applies to most vehicles. First, get inside the car and plug in your diagnostic system, in this case, the Multiecuscan, into the OBD2 port; then connect it to the computer and select the make and model of the car. At this point, perform the scan and go to the service light reset option, and wait for the software to communicate with the engine control unit to reset the light!


Updated on 7 April 2026 by ScegliAuto


Related tutorials

Essential Tasks for a Service on a Fiat Panda 169 1.3 MultiJet
Essential Tasks for a Service on a Fiat Panda 169 1.3 MultiJet
Fiat Panda (2003-2012 / 169, MK 2) In this video, we can see the essential checks to perform for a full service on the Fiat Panda 169 1.3 MultiJet. To loosen the oil filter, remove the…
How to Unscrew the Fuel Filter Collar of a Fiat Panda MultiJet
How to Unscrew the Fuel Filter Collar of a Fiat Panda MultiJet
Fiat Panda (2003-2012 / 169, MK 2) How do you unscrew the collar of the fuel filter on a Fiat Panda MultiJet without the proper tools, namely the removal key for the filter? If you are…
Guide to Removing the Turbocharger from the Fiat Panda 1.3 MultiJet
Guide to Removing the Turbocharger from the Fiat Panda 1.3 MultiJet
Fiat Panda (2003-2012 / 169, MK 2) This guide outlines the main steps to carry out the overhaul of the turbocharger on the second series Fiat Panda with a 1.3 MultiJet engine. First, o…

    Frequently Asked Questions

    • Panda 2012-2026 - How do you reset the Fiat Panda Service warning light? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos