Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the cabin filter in the Fiat Ducato van?

Model: Fiat Ducato X290 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Cabin air filter

See other generations:
Video tutorial

As we can see in this tutorial, replacing the cabin filter in the Fiat Ducato van is an extremely simple and quick operation. First, go inside the cabin, then locate the two small plastic caps at the bottom of the centre console, remove them, and using a cross-head screwdriver, unscrew the exposed screws.

Next, unscrew the screw located inside the cup holder, separate it from the dashboard, and remove the inner frame. At this point, simply open the long rectangular flap, remove the old filter, and follow the reverse procedure.


Updated on 29 August 2026 by ScegliAuto


Related tutorials

Fiat Ducato (2006-2014 / X250) .. In this tutorial, you will see how to replace the cabin filter in the Fiat Ducato van, a very simple and quick operation. First, position.. …
Fiat Ducato (2006-2014 / X250) .. In this tutorial we can see how to replace the cabin filter in the Fiat Ducato van, an extremely simple and quick operation. First.. …
Fiat Ducato (2006-2014 / X250) The spare wheel on your Fiat Ducato is located underneath the rear. Before you can start removing it, slightly lift the rear of the van. Begin by loo…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Program the Smart Key?

To program the Smart key, you must use a diagnostic tool: insert the key into the ignition switch located on the central tunnel, then connect the scanner to the vehicle's OBD port. Here, select the relevant car model and its corresponding version, following all instructions in the user and maintenance manual. Once the operation is complete, disconnect the scanner from the port and check that the key functions correctly.

Watch the video!


by ScegliAuto

More videos