Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Ducato
    4. : Where is it and how to remove the spare wheel of a Fiat Ducato

Fiat Ducato - Video tutorial

Model: Fiat Ducato X250 - Years 2006-2014
Part: Wheel
Operation: Where is it and how to remove the spare wheel of a Fiat Ducato

The spare wheel of our Fiat Ducato is located under the rear axle. Before we can start disassembling it, therefore, we will have to go and slightly raise the rear of the van. Let's start by loosening the screw that tightens the spare wheel fastening strap, using the tools provided in the basic kit of the van. By doing so, the belt will loosen, causing the spare tire to drop. At this point, we will be able to disengage and extract the spare wheel from its housing, and we will have correctly completed its disassembly.


Posted on 16 February 2024 by ScegliAuto



How to remove and install the Fiat Ducato spare wheel
Fiat Ducato (2014-2023 / X290) Today we will see, in this video tutorial, how to remove and replace the wheel with the spare wheel of the Fiat Ducato, in the camper version, by fol
How to replace the spare wheel on the Fiat Ducato
Fiat Ducato (2014-2023 / X290) In today's video tutorial we will see the steps that will allow us to remove and replace the wheel with the spare wheel of the Fiat Ducato, in the Ca
How do you install the spare wheel support on the Fiat Ducato?
Fiat Ducato (2014-2023 / X290) To install the spare wheel support for the Fiat Ducato, you need to access the rear bottom of the vehicle: here you will need to fix the brackets of

    Frequently Asked Questions

    • Ducato 2006-2014 - Where is the spare wheel on the Fiat Ducato located? Read Answer

Disassembly of the gear knob on the Lancia Ypsilon 2

Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever!

Watch the video!


by ScegliAuto

More videos