Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Install the Spare Wheel on the Fiat Ducato

Model: Fiat Ducato X290 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Wheel

See other generations:
Video tutorial

Today, in this video tutorial, learn how to remove and replace the wheel with the spare on the Fiat Ducato camper by following these simple steps. First, take out all the tools needed to replace the wheel with the spare; grab your socket wrench to unscrew the spare wheel bolt, removing it from the frame, as shown in the video.

Next, lift the vehicle with the jack and proceed to remove and replace the wheel with the spare, tightening the bolts in a criss-cross pattern; finally, reposition everything in the rear compartment!


Updated on 3 July 2026 by ScegliAuto


Related tutorials

Where to Find and How to Remove the Spare Wheel on a Fiat Ducato
Where to Find and How to Remove the Spare Wheel on a Fiat Ducato
Fiat Ducato (2006-2014 / X250) The spare wheel on your Fiat Ducato is located underneath the rear. Before you can start removing it, slightly lift the rear of the van. Begin by loo…
How to Install the Spare Wheel Support on a Fiat Ducato?
How to Install the Spare Wheel Support on a Fiat Ducato?
Fiat Ducato (2014-2026 / X290) To install the spare wheel support on a Fiat Ducato, access the lower rear part of the vehicle: here you will need to secure the spare wheel support …
Guide to replacing the wheel with the spare one on the Fiat Ducato Camper
Guide to replacing the wheel with the spare one on the Fiat Ducato Camper
Fiat Ducato (2014-2026 / X290) In this guide, we will see the main instructions on how to disassemble and replace the wheel with the spare one on the Fiat Ducato Camper. First of a…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos