Do it yourself
Frequently asked questions about cars and motorcycles

How to Install the Spare Wheel Support on a Fiat Ducato?

Model: Fiat Ducato X290 - Years 2014-2026
Part: Wheel

To install the spare wheel support on a Fiat Ducato, access the lower rear part of the vehicle: here you will need to secure the spare wheel support brackets using the appropriate bolts. Once the brackets are in place, pass the support cable through so that one end connects to the wheel and the other to the spool. When both ends of the cables are connected, you can screw in the spool of the support, allowing the wheel to rise and be securely fixed to the corresponding support.

Updated on 22 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat Ducato (2014-2026 / X290) Follow these simple and quick steps to install the fog lights on the Fiat Ducato. First, remove the plastic cover from the bumper's mounting point to…
Fiat Ducato (2006-2014 / X250) Before you begin, open the bonnet of your Fiat Ducato. The thermostat is located near the bottom side of the cylinder head. Start by loosening and re…
Fiat Ducato (2014-2026 / X290) Discover how to remove and replace the gaiter and gear knob on the Fiat Ducato in this brief and simple guide. First, get inside the vehicle and star…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos