Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Rear Tailgate Gas Struts

Model: Fiat Punto MK 2, 188 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Hydraulic pistons

See other generations:
Video tutorial

To replace the gas struts, remove the plastic covers near the fixing screws. For this operation, insert a screwdriver into the designated slot and lever carefully to avoid injury.

Support the tailgate or get assistance, and forcefully remove the strut from the retaining pin. The strut is simply clipped into a hemisphere. Remove it from both sides.

Fit the new strut by simply clipping both ends into the hemisphere. Refit the clips and covers both underneath and on the top. Test the proper operation by closing the tailgate.


Updated on 2 February 2026 by ScegliAuto


Related tutorials

How to Replace the Tailgate Struts on a 2009 Grande Punto
How to Replace the Tailgate Struts on a 2009 Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this video, you will see how to replace the tailgate struts on a 2009 Grande Punto. The operation is quite simple, but you will need two people be…
How to Replace the Boot Struts on a Fiat Punto Evo
How to Replace the Boot Struts on a Fiat Punto Evo
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Are the struts on your car's boot out of order? In this video, see how to replace the damaged struts on the rear boot of a Punto Evo. Lift the boot a…
Replacing the Rear Bonnet Support Struts
Replacing the Rear Bonnet Support Struts
Fiat Punto (1999-2011 / MK 2, 188) The rear bonnet support struts are actually gas springs and over time they can deteriorate, losing their ability to support the tailgate; replacing t…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos