Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulb on the Fiat 500X

Model: Fiat 500 500 X - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Headlight bulb

See other generations:
Video tutorial

Replacing the front headlamp bulb (H4 fitting) is very simple and does not require the removal of any components to access the headlamp housing. During this maintenance, it is recommended to replace both bulbs and choose a quality product, possibly with better features than the originals.

To replace the bulb, simply open the bonnet, access the rear of the headlamp, and remove the rubber protective cap. Then, disconnect the power connector and extract the bulb from its housing, inserting the new one.


Updated on 23 February 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp Bulbs in the Fiat 500X
Fiat 500 (2014-2022 / 500 X) Today, we will look at the instructions that will allow you to remove and replace the front headlamp bulb, both the main beam and the dipped beam, in…
How to Replace the Front Headlamp Bulb on a Fiat 500X?
How to Replace the Front Headlamp Bulb on a Fiat 500X?
Fiat 500 (2014-2022 / 500 X) To replace the front headlamp bulb on a Fiat 500X, open the bonnet to access the engine bay and locate the circular cap inside the headlamp. Once thi…
How to Replace the Front Headlight Bulb on a Fiat 500X
How to Replace the Front Headlight Bulb on a Fiat 500X
Fiat 500 (2014-2022 / 500 X) In this guide, we will provide instructions for removing and replacing the daytime running or position bulb of the front headlight on a Fiat 500X. To…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos