Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlight Bulb on a Fiat 500X

Model: Fiat 500 500 X - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Headlight bulb

See other generations:
Video tutorial

In this guide, we will provide instructions for removing and replacing the daytime running or position bulb of the front headlight on a Fiat 500X. To access the front position bulb, you need to remove the plastic cover found inside the wheel arch; disconnect the electrical connector of the bulb, then remove the bulb holder along with the position light, as shown in the video.

At this point, replace the daytime running light with a new one of the correct type and fitting; reassemble the bulb and check its proper functioning.


Posted on 13 April 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp Bulbs in the Fiat 500X
Fiat 500 (2014-2022 / 500 X) Today, we will look at the instructions that will allow you to remove and replace the front headlamp bulb, both the main beam and the dipped beam, in…
How to Replace the Front Headlamp Bulb on the Fiat 500X
How to Replace the Front Headlamp Bulb on the Fiat 500X
Fiat 500 (2014-2022 / 500 X) Replacing the front headlamp bulb (H4 fitting) is very simple and does not require the removal of any components to access the headlamp housing. Duri…
How to replace the front headlight bulb on a Fiat 500X
Fiat 500 (2014-2022 / 500 X) If you want to replace the front headlight bulb on your Fiat 500X yourself, carefully read the following instructions and put them into practice. Bef…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos